Download factory signed Infinix S4 X626 firmware/Stock ROM to restore your dead, bricked or virus-infected Infinix S4 device. If you’re an engineer and searching for Infinix S4 X626 firmware to download and fix a customers device, then, search no more.
Infinix S4 is one of the best budget smartphones from the Hong Kong-based manufacturer, it was launched in April 2019 and if by mistake you bricked your Infinix S4 X626, whether while trying to obtain root access, install a custom rom/recovery, or maybe it crashed during an OTA update, you’ll need the Infinix S4 X626 stock ROM to get your device working properly again.

Infinix S4 Key Specs and Features
Hot S4 | |
Network | 4G LTE |
Display | 6.2-inch Full-HD+ display with a waterdrop notch |
Memory | 3GB – 32GB |
Camera | Rear – 13MP + 8MP + 2MP | Front 32MP |
OS | Android Pie (XOS 5.0) |
Battery | 4000mAh |
Why you need Infinix S4 X626 firmware file
There are several reasons as to why you may need Infinix S4 X626 firmware file, some include;
- Recover your device from a brick (whether soft or hard brick).
- Fix boot loop caused by either a system update or changes you made in your device core files or apps.
- To upgrade or downgrade your OS version on your Infinix Hot 8 device.
- To fix bugs, remove virus and lags on your Android Device.
- Remove/bypass FRP
- For modifying your system files.
- Fix IMEI and baseband issues etc.
Device Information:
- Name: Infinix S4
- Model: X626/X626B
- Chipset: MediaTek MT6762
- Kernel: 4.9.117+
- OS version: Android 9.0 Pie
- Bootloader: Locked
Firmware Information:
- Device Supported: Infinix S4 X626
- Tool Supported: SP Flash Tool, After sales flash tool, Miracle box etc
- Processor: MediaTek MT6762
- Android OS: 9.0 Pie – Gapp Included
- File: Factory Signed
Infinix S4 X626 Firmware Download
Build (X626-H624JK-P-190417V239)
Build (X626-H624J-P-KESF-190417V239)
Infinix S4 X626B Firmware Download
Build (X626B-H623JKN-P-190618V248)
Build: (X626B-H623JK-P-190509V226)
How to flash Infinix S4 X626 Firmware
To flash the Infinix S4 X626 Stock firmware on your device you need to have the following;
- Android Vcom drivers installed on your PC
- AfterSales Flash tool (Recommended)
- SPFlashtool (smartphone flash tool)
- Miracle box or any other smartphone box
- A PC and of course a USB cable
Steps to Flash Infinix S4 X626
- If you haven’t downloaded Infinix S4 X626 factory firmware already, simply download from the above links.
- Download Infinix S4 X626 DA file, check the link below.
- Now extract the downloaded Infinix S4 X626 firmware to a folder on your desktop or anywhere you want it.
- Launch SP flash tool or aftersales flash tool on your PC or laptop.
- Now, load Infinix X626 scatter file into the flash tool.
- Once the component files have been loaded into the flash tool, set the download option to download only.
- Now, click on the start button to commence the flashing process.
- Power off your device and connect to the PC via USB cable.
- If vcom drivers are properly installed, SPFT /AfterSale tool will detect your device and begin a download process on the screen.
- Do not interrupt this download process for any reason.
- Once the download process is complete, you’ll get a green circle pop-up on the screen/ok.
- You can now disconnect your device from PC/laptop and power on.
The first boot might take a while, it’s nothing to worry about. It should take around 5-10minutes, so don’t panic.
That’s it you’ve successfully restored your Infinix S4 X626. If the above guide is not clear enough, please refer to our detailed guide on how to flash a device using sp flash tool here.
If our Infinix S4 X626 firmware helped you fix your device, don’t forget to spread the love using our social share buttons below.
Sir, I desperately Need Infinix S4 6GB RAM 64GB Internal Storage (MT6762 Chipset). Stock ROM all on the internet is for MT6765. Please help.
What is device build number?