iOS 10 Custom Rom For Infinix Hot 4

iOS 10 custom ROM for Infinix Hot 4 with MT6580 MediaTek chipset, 3.18.19 Android kernel. iOS 10 ROM mimics the original iOS ROM and its functionality, thanks to Mezz2000, iOS 10 custom ROM gives you the iOS feal and smoothness.  

Disclaimer: Make sure you take backup before flashing ROM. This blog or its author won’t be responsible for any damages or data loss during this process.

Note: This ROM should be flashed only on Infinix Hot 4 X557-H807A1-M-160815V57 and not on any other device.

Must Read: HOW TO FLASH ANY MEDIATEK ANDROID DEVICE USING SPFLASH TOOL

iOS 10 CUSTOM ROM FOR INFINIX HOT 4

This ROM contains all features of the iPhone iOS, the ROM is one sim enabled, which means it doesn’t support dual SIM. So, if you’re downloading this ROM, you’ll be using a single SIM. You can insert another sim into the other sim tray to keep it safe. Also, the fingerprint sensor isn’t working in this ROM, so don’t complain about that.

How to flash iOS 10 CUSTOM ROM on Infinix hot 4

Flashing this ROM on your Hot 4 will be done via spfashtool, which means you’ll need a PC and a USB cable for connecting your device to your pc.  

Steps To Install iOS 10 on Hot 4:

Step 1: Download the iOS 10 ROM from the given link below.

Step 2: Extract the ROM from the archive.

Step 3: Now, run the spflash tool and select the device to scatter file which will be in the extracted ROM folder.

Step 4: Select firmware upgrade as shown in the screenshot below.

iOS 10 FOR INFINIX HOT 4

Step 5: After successfully loading the scatter file, click the download button on the menu.

Step 6: Power off your device and remove the battery (if removable), make sure your device is totally off else spflash won’t detect your device.

Step 7: Now connect your device to PC via USB cable.

Step 8: if the operation was successful, you’ll get a green circle with a success mark on it.

iOS 10 FOR INFINIX HOT 4

When the process completes, disconnect your device from PC and power on your device. First boot will take some time so, don’t panic.

It takes 5-10 minute on first boot.

ROM Credits:

- Mezz2000 for porting ROM from Doogee X5
- Syed Ahmed Ali Shah for posting earlier
- Techzbyte 
35 Comments
  1. after i downloaded (iOs_for_Infinix_Hot_4) 600 mb, i wanted to extract it with winrar so that it could be flashed but it gave me errors when extracting. like 13 errors

  2. I'm sorry you got that error, but you're the first person to complain of such. Maybe the file got corrupt or download wasn't complete. Please ensure that the device you're using is safe from virus and you can try to download again

  3. i did as it is written on the page. i downloaded sp flash tool and dwnload the rom and extracted it and use sp flash tool to install it on my phone and i got green check mark and now my phone wont even start up its black screen please help ASAP

  4. Hello sir, if you followed the above steps correctly, your device should work fine.. Make sure you're not flashing it on other variants of hot 4(lite/pro). Also try doing a hard reset and see if it fixes this.

Leave A Reply

Please enter your comment!
Please enter your name here

Trending